Configure Device

Following the successful addition of a device to the mesh network, some devices need to be configured first. A good example of this is the 6-way Connect Mesh distributor (Mesh Box), whose ports can connect a wide variety of lights, actuators, and sensors.

Configuration of a 6-way Connect Mesh distributor (Mesh Box)

Initially, all 6 actuator ports of the Mesh Box are unoccupied. You can now press the available end devices one after the other. Each end device occupies a certain number of required ports. Depending on this allocation, the respective cables must also be connected. If you have made a mistake, you can click on a port at any time and delete the end device at that location with the "X". With the "Repeat" button at the top right, you can remove all assignments at once.

After configuring the actuator ports, you can optionally configure sensors or EnOcean devices. If no sensor is configured or an EnOcean device is linked, simply continue with the configuration.