Skip to main content

2-Channel Interface (80-230V)

The 2-channel interface allows for the switching of a 230V consumer at the relay output and the detection of switching pulses at the two 230V button inputs. The 2-channel interface can, for example, operate the ceiling lighting together with the kitchen lighting via wall switch. The relay can also be controlled by other Mesh switches and remote controls.

The following functions are supported:

  • On/Off switching at the relay output, support for scenes
  • Support for time control from firmware version >=5.0
  • Supports pairing for Enocean-BLE devices
  • Status LED visible from the front side

Please note:

  • The installation of the 2-channel interface should only be performed by an electrician.
  • The device does not have a reset switch, but it can be reset via the app. Follow the instructions in the "Reset Device" section.