Skip to main content

Managing Networks

With this app, you can manage multiple different mesh networks. However, you can only be connected to one network at a time with the app. If you want to leave the current network to switch to another network or to set up a new network, follow these steps:

  • Open the app settings (gear symbol in the upper right corner)
  • Go to "Leave"
  • Select one of the other networks and press "Connect"
  • Press the "+Network" button to create a new network

Deleting a Network

To delete a network, follow these steps:

  • Open the app settings (gear symbol in the upper right corner)
  • Go to "Leave"
  • Select the desired network and press "Forget".

Warning: If you delete a network from the app, your mesh devices will continue to work. However, you will no longer be able to control or change the network with the app. In this case, you will need to manually reset all devices and add them to a new network.

Resetting All Network Devices

The fastest way to reset all devices of your network is to delete them one by one through the app until there are no more devices left in the app. Follow these steps:

  • Switch to "Setup mode"
  • Go to the "Devices" tab
  • Select a device, go to "Options" and to "Delete"
  • If necessary, wake up battery-powered devices by holding down a button

If the reset was successful, the status LED will start to flash slowly.

Note: Mesh boxes can have multiple lighting devices. Only the base devices (in this case the mesh box) can be deleted and not the configured lights. Accordingly, only select base devices from the list.