Aller au contenu principal

Create Message

Create a Connect Mesh message payload. This message does not have a target yet, so its output needs to be piped into a setTarget Node.

Fields​

All fields, except for the name, can be overwritten by the incoming message:

{
  "messageType": "lightness",
  "lightness": 0.9,
  "transition_time": 2
}

Name​

Set the nodes name. Nice to distinguish different preprepared mesh messages.

Message Type​

messageType

Select the message type. Depending on that, other fields will appear:

  • Power power
  • Lightness lightness
  • Temperature temperature
  • Hue hue
  • Saturation saturation
  • Hue/Saturation/Lightness hsl
  • Temperature/Lightness ctl

Power​

power = [true, false]

Lightness​

0 < lightness < 1

Lightness as percentage.

Transition Time​

0 < transition_time < 372000

Time the transition from the current state to the target state is supposed to take. In deciseconds (0.1s). However, due to the limited resolution of transition times in the BLE Mesh Specification (Section 3.1.3), the provided time may be rounded down. The supported transition time increments are as follows: 0.1s steps within the range of 0-6.2s, 1s steps within the range of 0-62s, 10s steps within the range of 1-10.5 minutes, and 10-minute steps up to 10.5 hours.

Temperature​

800 < temperature < 20000

Temperature of tunable white light on black body curve in degree kelvin. Integer. Most Häfele products have a temperature between 2700 and 6000 degree kelvin.

Hue​

0 < hue < 360

Color hue on a 360° color wheel.

0° is red, 120° is green, 240° is blue.

Saturation​

0 < saturation < 1

Color saturation as percentage, 0 is white, 1 is pure hue.